Skip to main content
Repeater Panel

Repeater Panel

The Repeater fire alarm panel is designed to work with addressable fire alarm panels IRIS, IRIS PRO and SIMPO.
Standard
EN54 2/4
Number of Supported Panels
Up to 64
Distance Between Panels
up to 1000 m
Compatibility
IRIS, IRIS PRO and SIMPO
Explore
Display
5” TFT Color Display
Main Power Supply
AUX/GND (24 ±4)VDC
Power Consumption
Max. 0.11 A
Communication Channel
RS 485
Wiring Specifications
– maximum length between repeater and panel max. 1000m;
– cross Section 0.5-2.5mm²
Protection
IP 40
Relative Humidity Resistance
Up to 95%
Operating Temperature
-5°C to +50°C
Weight
~ 770g
Dimensions
200 x 330 x 48mm
Material
ABS
Network Type
Ring topology
Memory Log
10 000 events

IMPORTANT NOTE!
Operation with Repeater Panel is supported for the following revisions of the panels:

IRIS fire alarm panel:

  • LCD PCB Hardware revision: 2.4 and higher
  • MAIN Board Firmware revision: 4.2 and higher

SIMPO fire alarm panel:

  • MAIN Board Firmware revision: 2.8 and higher

 

The Repeater fire alarm panel is designed to work with Teletek Electronics addressable fire alarm panels IRIS, IRIS PRO and SIMPO.

It is used to display the current events of the connected to network addressable panels.

The connection between Repeater panel and other addressable panels IRIS, IRIS PRO and/or SIMPO is via redundant network module based on RS485 interface.

The information for events are visualized on LCD display and LED indication for the system status.

– Maximum number of fire alarm panels in network – 64.

– Maximum distance between two panels – up to 1000m.

– Built-in real time clock.

– Latest software and firmware update – via micro USB.